PnP sioc files for OC Modules

To demonstrate the power of SIOC, lekseecon and the Level-D SDK I have made Plug and Play (PnP) SIOC scripts (.ssi files) for the Opencockpits Modules EFIS737 or EFIS747, MCP737NG, ATC737, COMM737 and FMC747.

With these scripts and my lekseecon program you can use these modules together with the Level-D 767.

The installation requires not much technical knowledge. A configuration program will do the job. This is what you have to do:

1. Download and install SIOC 4.0 or later from the Opencockpits web site (free!), preferably on a drive other then C:, such as D:\SIOC
2. Download and install the self extracting lekseecon version 8.2+ software from my lekseecon downloads section at MyCockpit.org (free!). Install in the default location indicated by the installer; select component Opencockpits PnP Modules Support!
3. Plug in all your Opencockpits Modules
4. Run the ocm_configurator.exe program in the lekseecon\ocm folder.

That's all, enjoy your Modules!

In the OCM Manual, in folder ocm, you can read which functions were assigned to the various buttons, switches and displays.

Note that there is no need to install other Opencockpits software such as IOCP Server or software that comes with the modules.

Enjoy!